Choose Country of Delivery
Please select the country of delivery to show the prices with the correct VAT rate:Toyota Hilux (2015 - 2023)
| Show 1 to 31 (of in total 31 products) |
Front and Rear Axle
Axle:
Front and Rear Axle
This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts. Vehicle Application Information: ...
Quantity required for one car:
1
Front Axle
Axle:
Front Axle
Left and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction
Alignment Correction Complete Camber Adjustable Arm Assemblies with Offset SuperPro Bushings, Uprated Ball Joints & Camber Pins. 0.6 Degrees of Camber Adjustment
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours):
1.5
Axle:
Front Axle
Left and Right Arms for Standard Replacement and Repair Upgrade
Complete Arm Assemblies with Standard SuperPro Bushings, Uprated Ball Joints & Camber Pins
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 1.5
Axle:
Front Axle
Alignment Correction. Camber & Caster Adjustable Ball Joints & SuperPro Bushings +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 3
Axle:
Front Axle
Left and Right Offset Arms for Lifted Vehicles with Fixed Caster and Camber Correction Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 3
Axle:
Front Axle
Left and Right Arms for Standard Replacement and Repair Upgrade Complete Upper Arm Assemblies with Standard SuperPro Bushings and Uprated Ball Joints
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2.5
Axle:
Front Axle
Suits Lifted vehicles. The kit has been designed in such a way that allows the original bash plate to be refitted. It is supplied complete with all required spacers, bolts, washers and nuts. When lifting the Hilux 4WD/Land Cruiser Prado, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on ...
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (min): 60
Axle:
Front Axle
This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers Vehicle Application Information: To be used with standard height suspension only
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2
Axle:
Front Axle
12mm Ball Joint Adjustable Link Minimum Length 140 mm...Maximum Length 170 mm One ball joint per link with thread of 50mm length
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (min): 60
Axle:
Front Axle
Will not fit Koni Shocks Utilises superior Polyelast material for massive increase in durability in all applications.
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2
Axle:
Front Axle
Strut Cap, Spring Seat, Nuts & Washers two strut top mounts included
Quantity required for one car:
2
Rear Axle
Axle:
Rear Axle
Quantity required for one car:
1
Axle:
Rear Axle
This Kit is a safe, legal alternative to Extended Shackles. To be used with standard height suspension only.
Quantity required for one car:
1
Axle:
Rear Axle
To be used with aftermarket Greaseable Fixed pins Side impact protection for the fuel tank when greaseable pins are fitted from the outside on the LHS of the vehicle
Quantity required for one car:
1
Fitting Difficulty:
Axle:
Rear Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2.5
Axle:
Rear Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 1.5
Axle:
Rear Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 1.5
Axle:
Rear Axle
Note: Can not be used with Airbags fitted in the rear SuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars ...
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 1.5
| Show 1 to 31 (of in total 31 products) |
