Choose Country of Delivery
Please select the country of delivery to show the prices with the correct VAT rate:Ford Ranger PX - PX II (Facelift) (2/2016 - 2022)
| Show 1 to 30 (of in total 30 products) |
Front and Rear Axle
Axle:
Front and Rear Axle
This kit will lift the vehicle approx. 45mm and retains the standard suspension.
Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks & 4 U Bolts.
To be used with standard height suspension only
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours):
2.5
Front Axle
Axle:
Front Axle
Left and Right Arms for Standard Replacement and Repair Upgrade
Complete Arm Assemblies with Standard SuperPro Bushings & Uprated Ball Joints
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 1.5
Axle:
Front Axle
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment. Supplied with Camber & Caster Adjustable Ball Joints. Fitted with SuperPro Bushings
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2
Axle:
Front Axle
Getting the correct alignment on your lifted Ranger / BT-50 is no longer a problem.
The SuperPro Fixed Offset Upper Control Arm is an all-in-one solution for any vehicle that has been lifted between 40mm and 65mm (2.5”). Providing an increase between 2.5 and 3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off a 50mm L ...
Quantity required for one car:
1
Fitting Time (hours): 2
Axle:
Front Axle
Suits Lifted vehicles. It is supplied complete with all required spacers, bolts, washers and nuts. When lifting the Ford Ranger PX 4WD, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots that will lead to splitting and premature failure of the CV. The SuperPro bolt on kit corre ...
Quantity required for one car:
1
Fitting Time (hours): 3
Axle:
Front Axle
This kit will lift the vehicle approx. 45mm and retains the standard suspension.
Kit contains 2 Front Strut Spacers
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2
Axle:
Front Axle
12mm Ball Joint Adjustable Link Minimum Length 210 mm - Maximum Length 260 mm
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (min): 60
Axle:
Front Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 3
Axle:
Front Axle
Alignment Correction
Camber Adjustment +/- 1 Degree Camber Adjustment available
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 3
Axle:
Front Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 3
Axle:
Front Axle
Utilises superior SuperPro Hybrid material for massive increase in durability in all applications.
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2
Axle:
Front Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2.5
Axle:
Front Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2
Axle:
Front Axle
Strut Cap, Spring Seat, Nuts & Washers.
Suits O.E Style struts only.
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 1.5
Rear Axle
Axle:
Rear Axle
Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (min): 60
Axle:
Rear Axle
Quantity required for one car:
1
Axle:
Rear Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 3
Axle:
Rear Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 1.5
Axle:
Rear Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 1.5
Axle:
Rear Axle
For vehicles without AdBlue tank
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 4
Axle:
Rear Axle
Fits vehicles with AdBlue tank
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 4
Axle:
Rear Axle
Fits vehicles without AdBlue tank
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 4
| Show 1 to 30 (of in total 30 products) |
