Choose Country of Delivery
Please select the country of delivery to show the prices with the correct VAT rate:Toyota Land Cruiser Prado (2002 - 2010)
| Show 1 to 37 (of in total 37 products) |
Front and Rear Axle
Axle:
Front and Rear Axle
Kit Includes: 1xSPF2834K, 1xSPF4346K, 1xSPF2845K, 1xSPF2836K, 2xSPF2461K, 2xSPF1760K
This kit includes the following individual parts:
SPF4690K
SPF2845K
SPF4346K
SPF2836K
SPF1760K
SPF2461K
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours):
9
Front Axle
Axle:
Front Axle
Complete set of replacement Camber Bolt for one side
Quantity required for one car:
2
Fitting Difficulty:
Fitting Time (min): 60
Axle:
Front Axle
Left and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2
Axle:
Front Axle
Left and Right Arms for Standard Replacement and Repair Upgrade
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2
Axle:
Front Axle
Alignment Correction. Camber & Caster Adjustable Ball Joints & SuperPro Bushings Vehicle Application Information: +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment
Quantity required for one car:
1
Axle:
Front Axle
Left and Right Fixed Offset Arms for Lifted Vehicles with Caster and Camber Correction
Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber
Quantity required for one car:
1
Fitting Time (hours): 2
Axle:
Front Axle
Left and Right Arms for Standard Replacement and Repair UpgradeComplete Arm Assemblies with Standard SuperPro Bushings and Uprated Ball Joints
Quantity required for one car:
1
Fitting Time (hours): 2.5
Axle:
Front Axle
Suits Lifted vehicles. The kit has been designed in such a way that allows the original bash plate to be refitted. It is supplied complete with all required spacers, bolts, washers and nuts. When lifting the Hilux 4WD/Land Cruiser Prado, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on ...
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (min): 60
Axle:
Front Axle
RHS - Standard Replacement
12mm Ball Joint Link 85 Degree opposed Length 140mm center to center
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (min): 30
Axle:
Front Axle
LHS - Standard Replacement
12mm Ball Joint Link 85 Degree opposed Length 140mm center to center
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (min): 30
Axle:
Front Axle
12mm Ball Joint Adjustable Link Minimum Length 140 mm...Maximum Length 170 mm One ball joint per link with thread of 50mm length
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (min): 60
Axle:
Front Axle
Alignment Correction. Camber and Caster Adjustment +/- 1 Degree Camber & 1 Degree Caster Adjustment available
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 3.5
Axle:
Front Axle
Offset Tube for Camber Decrease on raised vehicles - Remove original shell for fitment
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 4
Axle:
Front Axle
Standard Replacement - remove original shell for fitment.
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 4
Axle:
Front Axle
Quantity required for one car:
1
Replaces OEM partnumber:
90389-14048
Fitting Difficulty:
Fitting Time (hours): 3
Axle:
Front Axle
Will not fit Koni Shocks Utilises superior Polyelast material for massive increase in durability in all applications.
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2
Axle:
Front Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2.5
Axle:
Front Axle
Strut Cap, Spring Seat, Nuts & Washers
Quantity required for one car:
2
Rear Axle
Axle:
Rear Axle
Standard Replacement
12mm Ball Joint/Bush Link 128mm center to center
Quantity required for one car:
2
Fitting Difficulty:
Fitting Time (min): 30
Axle:
Rear Axle
suits Sway Bars with 12mm Hole
12mm Ball Joint Adjustable Link with 12mm Vertical Ball Joint Minimum Length 165 mm - Maximum Length 210 mm
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (min): 30
Axle:
Rear Axle
suits Sway Bars with 10mm Hole
10mm Ball Joint Adjustable Link with 12mm Vertical Ball Joint Minimum Length 165 mm - Maximum Length 210 mm
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (min): 30
Axle:
Rear Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2
Axle:
Rear Axle
Quantity required for one car:
2
Fitting Difficulty:
Fitting Time (hours): 2.5
Axle:
Rear Axle
Quantity required for one car:
1
Fitting Difficulty:
Fitting Time (hours): 2
| Show 1 to 37 (of in total 37 products) |
