Toyota Land Cruiser Prado (2002 - 2010) [Change Vehicle]

AxleFront and Rear Axle

Beschreibung Front Camber Adjustable Kit contains: SPF2834Kx1, SPF4346Kx1,SPF3230Kx1, SPF3144Kx1, SPF2836Kx1, SPF2461Kx2, SPF1760Kx2

This kit includes the following individual parts SPF3144K SPF4690K SPF3230K SPF4346K SPF1760K SPF2461K SPF2836K

AxleFront Axle

Beschreibung SPF4690K x 1, SPF4346K x 1

This kit includes the following individual parts SPF4690K SPF4346K

AxleFront Axle

Beschreibung Kit Content: SPF4690K x 1, SPF4346K x 1, SPF2845K x 1

This kit includes the following individual parts SPF4690K SPF2845K SPF4346K

AxleFront Axle

Beschreibung Complete set of replacement Camber Bolt for one side

AxleFront Axle

Beschreibung Left and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction

Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement

AxleFront Axle

Beschreibung Left and Right Arms for Standard Replacement and Repair Upgrade

Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement

AxleFront Axle

Beschreibung Alignment Correction. Camber & Caster Adjustable Ball Joints & SuperPro Bushings Vehicle Application Information: +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment

AxleFront Axle

BeschreibungLeft and Right Fixed Offset Arms for Lifted Vehicles with Caster and Camber Correction

Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber

AxleFront Axle

Beschreibung Left and Right Arms for Standard Replacement and Repair UpgradeComplete Arm Assemblies with Standard SuperPro Bushings and Uprated Ball Joints

AxleFront Axle

Beschreibung Suits Lifted vehicles. The kit has been designed in such a way that allows the original bash plate to be refitted. It is supplied complete with all required spacers, bolts, washers and nuts. When lifting the Hilux 4WD/Land Cruiser Prado, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on ...

AxleFront Axle

Beschreibung Raises vehicle approximately 10-12mm OD: 125mm; ID: 79mm; H: 6mm

AxleFront Axle

Beschreibung RHS - Standard Replacement

12mm Ball Joint Link 85 Degree opposed Length 140mm center to center

AxleFront Axle

Beschreibung LHS - Standard Replacement

12mm Ball Joint Link 85 Degree opposed Length 140mm center to center

AxleFront Axle

Beschreibung 12mm Ball Joint Adjustable Link Minimum Length 140 mm...Maximum Length 170 mm One ball joint per link with thread of 50mm length

AxleFront Axle

Beschreibung Standard Replacement

AxleFront Axle

Beschreibung Alignment Correction. Camber and Caster Adjustment +/- 1 Degree Camber & 1 Degree Caster Adjustment available

AxleFront Axle

Beschreibung Standard replacement

AxleFront Axle

Beschreibung Alignment Correction. Camber Adjustable 0.6 Degrees of Camber Adjustment

AxleFront Axle

Beschreibung Offset Tube for Camber Decrease on raised vehicles - Remove original shell for fitment

AxleFront Axle

Beschreibung Standard Replacement - remove original shell for fitment.

AxleFront Axle

AxleFront Axle

Beschreibung Will not fit Koni Shocks Utilises superior Polyelast material for massive increase in durability in all applications.

AxleFront Axle

AxleFront Axle

AxleFront Axle

AxleFront Axle

Beschreibung will not fit KDSS vehicles

AxleFront Axle

Beschreibung

Strut Cap, Spring Seat, Nuts & Washers

AxleRear Axle

Beschreibung Kit Includes: 1xSPF2836K, 2xSPF2461K, 2xSPF1760K

This kit includes the following individual parts SPF1760K SPF2461K SPF2836K

AxleRear Axle

Beschreibung Standard Replacement

12mm Ball Joint/Bush Link 128mm center to center

AxleRear Axle

Beschreibung suits Sway Bars with 12mm Hole

12mm Ball Joint Adjustable Link with 12mm Vertical Ball Joint Minimum Length 165 mm - Maximum Length 210 mm

AxleRear Axle

Beschreibung suits Sway Bars with 10mm Hole

10mm Ball Joint Adjustable Link with 12mm Vertical Ball Joint Minimum Length 165 mm - Maximum Length 210 mm

AxleRear Axle

AxleRear Axle

BeschreibungMeasure bar diameter

AxleRear Axle

AxleRear Axle

AxleRear Axle

Beschreibung Suits models without KDSS or rear E-Locker differential