Toyota Hilux (2015 - 2023) [Change Vehicle]

AxleFront and Rear Axle

Beschreibung This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts. Vehicle Application Information: ...

AxleFront Axle

Beschreibung Complete set of replacement Camber Bolts

AxleFront Axle

Beschreibung Left and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction

Alignment Correction Complete Camber Adjustable Arm Assemblies with Offset SuperPro Bushings, Uprated Ball Joints & Camber Pins. 0.6 Degrees of Camber Adjustment

AxleFront Axle

Beschreibung Left and Right Arms for Standard Replacement and Repair Upgrade

Complete Arm Assemblies with Standard SuperPro Bushings, Uprated Ball Joints & Camber Pins

AxleFront Axle

Beschreibung Alignment Correction. Camber & Caster Adjustable Ball Joints & SuperPro Bushings +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment

AxleFront Axle

Beschreibung Left and Right Offset Arms for Lifted Vehicles with Fixed Caster and Camber Correction Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber

AxleFront Axle

Beschreibung Left and Right Arms for Standard Replacement and Repair Upgrade Complete Upper Arm Assemblies with Standard SuperPro Bushings and Uprated Ball Joints

AxleFront Axle

Beschreibung Suits Lifted vehicles. The kit has been designed in such a way that allows the original bash plate to be refitted. It is supplied complete with all required spacers, bolts, washers and nuts. When lifting the Hilux 4WD/Land Cruiser Prado, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on ...

AxleFront Axle

Beschreibung This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers Vehicle Application Information: To be used with standard height suspension only

AxleFront Axle

Beschreibung Raises vehicle approximately 10-12mm OD: 125mm; ID: 79mm; H: 6mm

AxleFront Axle

Beschreibung 12mm Ball Joint Adjustable Link Minimum Length 140 mm...Maximum Length 170 mm One ball joint per link with thread of 50mm length

AxleFront Axle

Beschreibung

Standard replacement

AxleFront Axle

Beschreibung Alignment Correction Camber and Caster Adjustable

AxleFront Axle

Beschreibung

Standard replacement

AxleFront Axle

Beschreibung

Alignment Correction Camber and Caster Adjustable

AxleFront Axle

Beschreibung Standard replacement Remove original shell for fitment

AxleFront Axle

Beschreibung Alignment Correction Camber Adjustable 0.5 to 1 Degree of Camber Adjustment

AxleFront Axle

Beschreibung Will not fit Koni Shocks Utilises superior Polyelast material for massive increase in durability in all applications.

AxleFront Axle

Beschreibung

AxleFront Axle

AxleFront Axle

Beschreibung Strut Cap, Spring Seat, Nuts & Washers two strut top mounts included

AxleRear Axle

Beschreibung Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings

AxleRear Axle

AxleRear Axle

Beschreibung This Kit is a safe, legal alternative to Extended Shackles. To be used with standard height suspension only.

AxleRear Axle

AxleRear Axle

Beschreibung To be used with aftermarket Greaseable Fixed pins Side impact protection for the fuel tank when greaseable pins are fitted from the outside on the LHS of the vehicle

AxleRear Axle

Beschreibung

AxleRear Axle

AxleRear Axle

AxleRear Axle

AxleRear Axle

Beschreibung Note: Can not be used with Airbags fitted in the rear SuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars ...